Sycamore

Description

Options
Toughened glass or perspex windows
No windows
Wider single door
Double doors (lock replaced by slide bolt)
Door hinged on the opposite side
Shedsheet rubber roof covering
Various window layouts available

1.2m double doors for 1.8m wide (in lieu of single door) £54
1.5m double doors for a 2.4m wide (in lieu of single door) £64
5 Lever lock on T&G sheds (single door) £27
5 Lever lock on Silverbirch shed £88
Rim lock with handle (single door) £20
No windows £0
Toughened safety glass (per pane) £6
Bolt hinges (single door) £20
Swap side of hinges on single door £0
(Single doors are hinged on the left as standard)

Further Info
Building Sizes: All sizes are approximate, based on external measurements (unless stated otherwise). Please allow for any overhangs when choosing the size of your building such as the roof overhang as this is not included in the measurements. Also, allow the space required for installation and maintenance. We strongly advise you check internal and external sizes if buying a building for a specific purpose and the sizing is crucial. Depending on the size and location for some buildings planning permission can be required. If you are unsure please check with your local council.

Size W x D x H: The Front Width (normally the long side) x Depth (the sloping ends) x Height (to the top of the roof) in metres. Non-standard sizes are available.
Windows: Quantity of windows, which can depend on the position of the door. For example, on a Suffolk 10×6 style 3, there would be three windows in the Front Width, but in a Suffolk 10×6 style 2, there would only be room for two windows in the Front Width, as the door takes the place of one of the windows.
Door W x H: Width x Height of the door in millimetres. Please note the door gap is slightly smaller than the door itself.