Description
Options
Toughened glass or perspex windows
No windows
1.2m double doors on 8×6 and 10×6 models (lock replaced by slide bolt)
1.5m double doors on 10×8 models (lock replaced by slide bolt)
Door hinged on the right (on left as standard)
Shedsheet rubber roof covering in lieu of felt
1.2m double doors for 1.8m wide (in lieu of single door) £54
1.5m double doors for a 2.4m wide (in lieu of single door) £64
5 Lever lock on T&G sheds (single door) £27
5 Lever lock on Silverbirch shed £88
Rim lock with handle (single door) £20
No windows £0
Toughened safety glass (per pane) £6
Bolt hinges (single door) £20
Swap side of hinges on single door £0
(Single doors are hinged on the left as standard)
Further info
Building Sizes: All sizes are approximate, based on external measurements (unless stated otherwise). Please allow for any overhangs when choosing the size of your building such as the roof overhang as this is not included in the measurements. Also allow the space required for installation and maintenance. We strongly advise you check internal and external sizes if buying a building for a specific purpose and the sizing is crucial. Depending on the size and location for some buildings planning permission can be required. If you are unsure please check with your local council
Eaves Height: Internal height at the lowest point of the roof (at the sides).
Size L x W x H: The Length (the window side) x Width (the door end) x Height (to the top of the apex) in metres.
Door W x H: Width x Height of the door in millimetres. The door gap is slightly smaller than the door itself.
Windows: Number of windows on one of the sides, the other side is fully boarded. The window side and the plain side are interchangeable so the windows can be positioned on either side when assembling.
Reviews
There are no reviews yet.